Our products are reported to run safely on following browsers as well but these browsers are not offically supported:
Opera 9.5
IE8
Safari 3.1
Google Crome
Supported Hardware
op5's products can either be run on an appliance-server from op5 or on basically any hardware that Red Hat 32-bit or 64-bit Enterprise Linux 5 can run on.
Below is a list of appliance models still in use and running op5 software.
Model
Description
32-bit
64-bit
Tranfor
(first generation)
Yes
No
Datanova
(second generation)
Yes
No
DELL PE-sc1425
("entry", third generation)
Yes
Yes
DELL PE-1850
("standard" and "large", third generation)
Yes
Yes
DELL PE-860
("entry", fourth generation)
Yes
Yes
DELL PE-1950
("standard" and "large", fourth generation)
Yes
Yes
DELL PE-1950-III
("standard" and "large", fifth generation)
Yes
Yes
DELL PE-r200
("entry", fifth generation)
Yes
Yes
DELL PE-r410
("standard" and "large", sixth generation)
Yes
Yes
Hardware Deployment Recommendations
op5 Monitor and op5 Statistics can be installed and operated on the same op5 Appliance Server.
op5 LogServer requires its own standard or large server due to processor and memory requirements.
Supported OS
*
*
* 64-bit support available for op5 Monitor 4.1 and later, and op5 LogServer 3.3 and later versions.
Hardware Specification Recommendations
op5 Monitor
Requirement for: 200 hosts / 1000 services, Max 1000 hosts / 5000 services for one system CPU: one 3Ghz CPU RAM: 512MB Disk: 60GB recommended
op5 Statistics
Requirement for: 200 hosts / 1000 graphs, Max 1000 hosts / 5000 graphs for one system CPU: one 3Ghz CPU RAM: 512MB Disk: 80GB recommended
op5 Logserver
requirement for: 100 hosts / approximatly 2M log rows per 24h CPU: one 3Ghz CPU RAM: 512MB Disk: 80GB recommended, the more you add the more log data you can store Note: More RAM memory will improve performance (shorter response time)
Technical Requirements 
*
*
