Supported Browsers

Firefox 3.6+	Internet Explorer 7+	Google Chrome

Also reported to work with

Our products are reported to run safely on these browsers as well, but these browsers are not officially supported.

Opera 9.5	Safari >= 3.1

Supported Hardware

op5 Monitor and other op5 software can favourable be run on op5 hardware or virtual servers to ensure full support of Software, HW and OS. op5 Server uses a customized operating system called op5 Appliance Software, that is optimized for running op5s software.

Below is a list of Hardware Server models still in use and running op5 software.

Model	Description	32-bit	64-bit
Tranfor	first generation
Datanova	second generation
DELL PE-sc1425	“entry”, third generation
DELL PE-1850	“standard” and “large”, third generation
DELL PE-860	“entry”, fourth generation
DELL PE-1950	“standard” and “large”, fourth generation
DELL PE-1950-III	“standard” and “large”, fifth generation
DELL PE-r210	“entry”, fifth generation
DELL PE-r410	“standard” and “large”, sixth generation

Hardware Deployment Recommendations

The op5 LogServer extension requires its own standard or large server due to processor and memory requirements.

Hardware Recommendations

op5 Monitor

Requirement for: 200 IP-addresses / 1000 services, Max 1000 IP-addresses / 5000 services for one system
CPU: one 3Ghz CPU
RAM: 512MB
Disk: 60GB recommended

op5 LogServer

Requirement for: 100 IP-addresses / approximately 2M log rows per 24h
CPU: one 3Ghz CPU
RAM: 512MB
Disk: 80GB recommended, the more you add the more log data you can store
Note: More RAM memory will improve performance (shorter response time)

Supported Operating Systems

*

**

**

***

* Shipped as OS on op5 Server
** 64-bit support available for op5 Monitor 4.1 and later, and op5 LogServer 3.3 and later versions.
*** Requires Solaris Extension